industrial mining anti-wear centrifugal sand slurry water pump manufacturer
centrifugal slurry pump usage:
widely used in nonferrous metal mineral processing of mine,single volute, made of high chrome Cr26.
ZJ double casing centrifugal slurry pump ZJD single volute centrifugal slurry pump
ZJD type is a single-volute mining slurry pump designed and developed by our factory,
there are following advantages compared with ZJ type double casing slurry pump:
easy to dismantle and assemble |
Slurry leakage of pump is visible |
Same material with ZJ type inner volute,but we increase its thickness to prolong lifetime after changing double-casing pump to single-volute pump. |
Very convenient for old users to upgrading,their inlet,outlet,base,outer dimension of installation and performance are all same. |
1.Clear water injection pipe for seal:water injection pressure should be above 1kg than pump working pressure,which will be a high pressure clear water area to seal between pressure-relief cover(packing room) and deputy impeller.
2.Pressure-relief cover:named stuffing box,a deputy impeller inside,install packing ring in packing box,then put into several circles of packing in order to form a seal set between deputy impeller,packing and shaft sleeve.
3.Packing gland:installed on shaft sleeve outside and stuffing box entrance,compress the packing to suitable position with two pieces bolts through packing gland.
4.Shaft sleeve:abrasion resistant high chrome alloy material,installed outside of the pump shaft and the inside of stuffing box,which make friction between shaft sleeve outside and packing,the clear water seal will prolong shaft sleeve lifetime.
5.Disassembled ring:there are three parts for it,installed between shaft sleeve and water retaining plate,please remove the three bolts on it when dismantle pump,then remove the three parts with hammer in order to dismantle the impeller;
6.Water retaining plate:installed between front bearing gland and disassembled ring,its excircle and bearing gland forms labyrinth joint which will prevent the slurry spilling from stuffing box into the bearing case.
7.Oil injection hole:inject lubricating oil into bearing box through it.
8.Oil level window:please add oil level between above middle line and under 20mm when make sure pump base parrallel to the ground.
9.Bearing box: control the back bearing on frame support with back bearing gland,can adjust the impeller gap with the 8 bolts on bearing box.please loosen the 6 bolts first on each side of the frame support and front bearing gland bolts when adjust,then adjust the impeller gap with the 8 bolts on bearing box(4 adjustment bolts to impeller direction,the other four bolts to coupling direction)
| Model | rotate speeed r | flow m³/h | head m | power kw/vol |
| 150ZJD-A70 | 980 | 186 | 91.2 | 132/380,50hz |
| 285 | 87.1 | 160/380,50hz | ||
| 401 | 79.8 | 185/380,50hz | ||
| 730 | 139 | 50.6 | 55/380,50hz | |
| 212 | 48.3 | 75/380,50hz | ||
| 299 | 44.3 | 75/380,50hz | ||
| 150ZJD-A65 | 980 | 300 | 75.7 | 132/380,50HZ |
| 500 | 73 | 185/380,50HZ | ||
| 600 | 69.4 | 200/380,50HZ | ||
| 730 | 223 | 42 | 75/380,50HZ | |
| 372 | 40.5 | 75/380,50HZ | ||
| 447 | 38.5 | 90/380,50HZ | ||
| 150ZJD-A63 | 980 | 291 | 71.1 | 132/380,50HZ |
| 485 | 68.6 | 160/380,50HZ | ||
| 582 | 65.2 | 185/380,50HZ | ||
| 730 | 216 | 39.5 | 55/380,50HZ | |
| 361 | 38 | 75/380,50HZ | ||
| 433 | 36.2 | 75/380,50HZ | ||
| 150ZJD-A60 | 980 | 270 | 63.5 | 110/380,50HZ |
| 470 | 60.5 | 132/380,50HZ | ||
| 550 | 58.7 | 160/380,50HZ | ||
| 730 | 201 | 35.2 | 45/380,50HZ | |
| 350 | 33.6 | 55/380,50HZ | ||
| 410 | 32.6 | 75/380,50HZ | ||
| 150ZJD-A58 | 980 | 261 | 59.3 | 90/380,50HZ |
| 454 | 56.5 | 132/380,50HZ | ||
| 532 | 54.9 | 132/380,50HZ | ||
| 730 | 194 | 32.9 | 37/380,50HZ | |
| 338 | 31.4 | 55/380,50HZ | ||
| 396 | 30.5 | 55/380,50HZ | ||
| 150ZJD-A55 | 980 | 248 | 53.4 | 90/380,50HZ |
| 431 | 50.8 | 110/380,50HZ | ||
| 504 | 49.3 | 110/380,50HZ | ||
| 730 | 184 | 29.6 | 37/380,50HZ | |
| 321 | 28.2 | 45/380,50HZ | ||
| 376 | 27.4 | 55/380,50HZ | ||
| 150ZJD-C58 | 980 | 268 | 61 | 110/380,50HZ |
| 458 | 56 | 132/380,50HZ | ||
| 596 | 51.2 | 160/380,50HZ | ||
| 730 | 200 | 33.8 | 45/380,50HZ | |
| 341 | 31.1 | 55/380,50HZ | ||
| 444 | 28.4 | 75/380,50HZ | ||
| 150ZJD-A57 | 980 | 190 | 56.3 | 90/380,50HZ |
| 301 | 55.4 | 110/380,50HZ | ||
| 427 | 52.9 | 110/380,50HZ | ||
| 730 | 142 | 31.2 | 37/380,50HZ | |
| 224 | 30.7 | 45/380,50HZ | ||
| 318 | 29.4 | 55/380,50HZ | ||
| 150ZJD-A50 | 980 | 230 | 43.1 | 55/380,50HZ |
| 380 | 40 | 75/380,50HZ | ||
| 460 | 37.8 | 75/380,50HZ | ||
| 730 | 171 | 23.9 | 30/380,50HZ | |
| 283 | 22.2 | 30/380,50HZ | ||
| 343 | 21 | 37/380,50HZ | ||
| 150ZJD-A48 | 980 | 221 | 39.7 | 55/380,50HZ |
| 365 | 36.9 | 75/380,50HZ | ||
| 442 | 34.8 | 75/380,50HZ | ||
| 730 | 164 | 22 | 22/380,50HZ | |
| 272 | 20.5 | 30/380,50HZ | ||
| 329 | 19.4 | 30/380,50HZ | ||
| 150ZJD-C42 | 1480 | 300 | 62.8 | 110/380,50HZ |
| 450 | 58 | 132/380,50HZ | ||
| 550 | 54.3 | 132/380,50HZ | ||
| 980 | 199 | 27.5 | 30/380,50HZ | |
| 298 | 25.4 | 37/380,50HZ | ||
| 364 | 23.8 | 45/380,50HZ |
Company Information
1.processing with supplied drawing
2.processing with supplied samples
3.produce all kinds of anti abrasive spare parts except for pump
4.product warranty:lifetime, no matter how long to use,if there is air hole in the flow parts,please return it,will give you a new one to repalce.
Buying Guides
please provide following technical data for our reference,then we will recommend proper model:
- hot sale slurry pump is used for pumping what is kind of liquid,in what is kind of place
- conveying distance (m)
- conveying height (m)
- suction depth(m);sand layer (m)
- pipe size(inner diameter)
- fine sand,middle sand or rough sand? if is there stone or not,what is the biggest stone diameter?
- take some pictures of your working site
Related Products
please click above pictures to view vedio
Look to electric centrifugal pump you need for water circulation and filtration, oil extraction and chemical processing. Keep fountains, water gardens and coolant systems at your complex clear and refreshed with an epoxy-coated industrial mining anti-wear centrifugal sand slurry water pump manufacturer. A self-priming, portable utility electric centrifugal pump can speed up the draining process. Increase pressure in city mains or maximize filtration operations in pond systems with a booster industrial mining anti-wear centrifugal sand slurry water pump manufacturer. When electric centrifugal pump's time for a new centrifugal pump for water, sewage and chemical processing systems,industrial mining anti-wear centrifugal sand slurry water pump manufacturer got you covered.
HSYSBD
electric centrifugal pump Particularly suited to applications including watersupply to civil,agricultural and industrial plants, Pressure boosting, Fire-fighting,heating systems and air-conditioning, industrial mining anti-wear centrifugal sand slurry water pump manufacturer Moving industrial liquids,Irrigation, Refrigeration towers, Swimming pools, Washing plants.
KJSBH