IS IH Stainless Steel Electric Farm Transfer End Suction Centrifugal Pump

IS IH Stainless Steel Electric Farm Transfer End Suction Centrifugal Pump

>>> Brief Description

KAIYUAN IS IH centrifgual pump complies fully to the European Standard BS EN733 / DIN24255 of performance and dimensions. They are used for pumping clean water or liquids similar to water, achieving wideapplicationin plants, mines, city water supplies, air-conditioning coolers, firefighting system and irrigation.

Pumps of the same model have different performance levels basing on different diameter after impeller trimming. Overall the whole series, there are only four sizes of shaft and five of bearing housing. As long as their bearing housings are of the same size, different pumps can interchange chief parts such as shaft, shaft sleeve, shaft seal, impeller nut, etc.

KAIYUAN IS IH centrifugal pump is also very easy to be installed and maintained. Back pull-out design, driven through flexible coupling, so that pump casing and motor can remain in position while other spare parts are removed.

Material

Operating Range

Structure Drawing

Main Parts Gland Packing

>>> Assembly and Disassembly

Ensure no parts are missing or defective before assembly, wipe every part clean then start.

1). Tighten the bolts, screws and other fasteners to each relevant assembly parts.

2) .Lay O rings, gaskets, felted wool or other sub-seals in each relevant assembly parts.

3) .Place wearing ring and gaskets into casing cover.

4) .Mount ball bearings to shaft, and joint shaft and bearing housing together, close bearing cover with bolts then put slinger onto shaft.

5). Depress stationary seal ring into mechanical seal cover, put seal cover,mechanical seal,shaft sleeve one by one onto shaft.

6). Fasten casing cover onto bearing housing by fastening bolts, place key into shaft, set impeller on key, put lock washer and impeller nut onto shaft against impeller and tighten them.

7). Fix all the assembly parts where mentioned above into volute casing, tighten all the bolts and screws for volute casing, casing cover and mechanical seal.

>>> Installation

Correct way of centrifugal pump installation makes great sense of stable performance and long service life. All the procedure of mounting and adjusting should be carried out carefully. For outline and dimension, see the outline picture and dimension table.

Mounting and adjusting

1). Remove all the dust and dirt on base plate then place it onto ground foundation.

2). Check foundation level by level meter, iron wedge or steel shims can be used for adjustment.

3). Pour concrete into baseplate and foundation bolts holes.

4). Check foundation bolts to see if it is loose or not after concretion, and then tighten the bolts, check level again.

5). Clean the mounting surfaces of baseplate, pump foot and motor foot, and fix pump and motor onto baseplate.

6). Make sure the clearance between couplings is left from 2-4mm. The centerline of centrifugal pump should be in alignment with that of motor, axial and radial tolerance is 0.2mm. Shims are available for alignment.

>>> Starting

1).Check that the direction of the motor rotation corresponds to the direction IS IH Stainless Steel Electric Farm Transfer End Suction Centrifugal Pump on the pump casing before joint pump and motor together. Ensure that the pump is running freely without seizure or friction.

2).Turn down discharge valve.

3).Fill the pump with liquid or priming with a IS IH Stainless Steel Electric Farm Transfer End Suction Centrifugal Pump pump.

4).Switch on power, gradually turn up discharge valve after pump operation runs normally to achieve the target performance.

Caution: 3 minutes is the Max. continuous working time for a pump to operate with closed discharge valve

>>> Checking

1). Check direction of pump rotation, which should be clockwise viewing from the drive side.

2). Check alignment of the couplings both of pump and motor before using. Over-tolerancewill damage flexible elements in a short time, and also cause over standard vibration as well as noise.

3). Check leakage of gland packing and tightness of gland cover; make them adequate to the job. If it is fitted with mechanical seal, make sure that the pump is operating with water inside; otherwise thedynamic and stationary rings would be worn out in dry operation

4). Check oil level, which should be kept in the specified range by oil gauge If it is grease, make sure that the bearings are filled with grease.

>>> Stopping

1). Turn down discharge valve gradually, switch off the power.

2). Drain away water left inside the pump to avoid frost crack while the temperature is blew 0℃.

3). To keep a pump out of use for a long time, disassemble it into spare parts, store them in an appropriate place after lubrication.

>>> Running and Maintenance

1). Readings by the meters are very important in starting and running. Care must be taken to heating, leakage, vibration and noise. Abnormal cases should be handled immediately on discovery.

2). Bearings are not allowed to work at the temperature 40℃ higher than the temperature around, and the Max. temperature is 80℃.

3). In normal cases, a steady drip from the gland should be in a small amount, at about 60 drops per minutes while almost non-leakage from mechanical seal.

4). Lubrication should be 4# Calcium Base Grease or SAE20W Oil. Pumps working at 2900 rpm should be replenished with new oil or grease every period of 2500 working hours, 1450 rpm ones should be replenished every 5000 working hours. Ball bearings should be dismantled and replaced by the new ones every 10000 working hours, and also oil cup should be thoroughly cleaned out and filled with fresh lubrication

>>> Photo on Site

IS IH Stainless Steel Electric Farm Transfer End Suction Centrifugal Pump

IS IH Stainless Steel Electric Farm Transfer End Suction Centrifugal Pump

1. Punctual delivery time:

• We put your order into our tight production schedule, keep our client informed about production process, ensure your punctual delivery time.
• Shipping notice/ insurance to you as soon as your order is shipped.

2. After sales service:

• After receiving the goods, We accept ur feedback at first time.
• We could provide installation guide, if you have need, we could give you global service.
• Our Sales are 24-hours online for ur request.

3. Professional sales:

• We value every inquiry sent to us and ensure quick competitive offer.
• We cooperate with customer to bid tenders, and provide all necessory document.
• We are a sales team, with all techinical support from engineer team.

Shanghai Kaiyuan Pump have many global clients, we offer professional service to them. With the aim of "to establish a close strategic partnership and develop together with customers". we will work whole heartedly to improve our products and service. We will also pledge to work jointly with businese partners to elevate our cooperation to a higher level and share success together with our customers. We are looking forward to establishing relationships with you in the near future.

IS IH Stainless Steel Electric Farm Transfer End Suction Centrifugal Pump

We only provide best quality products and best service for our customers. Renewed and Defective goods is forbidden in our factory! Please be relieved to choose our products! Together, we make it better!

KAIYUAN FACTORY

KAIYUAN CERTIFICATES

IS IH Stainless Steel Electric Farm Transfer End Suction Centrifugal Pump

1, Are you a trade company or a manufacturer?

A: We are a professional manufacturer of centrifugal pump, such as sewage pump, fire-fighting water pump, multi-stage vertical (horizontal) water pump, diesel engine water pump, water supply equipment, water pump control panel, EDJ fire fighting water pump sets and other pumps.

2, How to control quality?

A: We have always placed great emphasis on quality control to ensure excellent quality level is maintained. We check every process very carefully. After finishing production, the product will be tested one by one to control quality. Morever the price we always maintained is strickly quality control. We have CE, ISO9001 certificate.

3, What is your trade terms, payment terms and delivery time?

A: FOB, CIF, CFR, EXW etc.30% before production, 70% before shipment. 100% T/T is the best way for us, but we also accept L/C. Usually 10-25 days for production (according your quantity). If you are in a hurry, the delivery time will be shorter.

4, If i want a quotation?

A: What's the model you want? (or provide detailed requirements)

What's the spare parts, standard or required?

What's the quantity of order, large quantity of order will get more discounts.

5, Can you provide your price list?

A: we do not have price list for many of our customers have other requirements and our price list is not satisfying them. Therefore, it will be better if you inform us your parameters, such as flow, head, power, medium, etc.

we Kaiyuan are working out with so many customers from all over the world, middle east, south asia, africa, south america & europe. some became our sole distributors in their own country.

the reasons why they will choose Kaiyuan as their chinese supplier in a long term are very simple.

1. factory visiting. most of them will come to visit our factory and check out pumps onsite. by this way, they will know us better. u can check out our company video by this link from IS IH Stainless Steel Electric Farm Transfer End Suction Centrifugal Pump.com

http://kypump.en.IS IH Stainless Steel Electric Farm Transfer End Suction Centrifugal Pump.com/company_profile/video_introdution.html

2. trial order quality checking. they have placed some orders for us, and it turns out that our pumps have very competitive prices compared to the pumps in their own market, and what's more, their final customers are very satisfied with our pumps in both quality and aftersales services.

3. professional tech-support during production and aftersales. we have our own technicial team, we can support u with a larger range of related products, such as pump, electric motor, pump control panel and accesseries like pipe, valves, flanges, pressure gauge and so on.

4. why do our pumps have competitive prices with very good quality? 1. we produce our own electric motor. 2. we have our own casting factory. 3. we have our own control panel production team. 4. we have our own pump testing center in our own factory.

5. certificates. ISO9001, SGS, TUV, CCC, CE. check out our main catalog to know more.

plz send the pump inquiry, i would surely be happy to offer u a quote.

Look to electric centrifugal pump you need for water circulation and filtration, oil extraction and chemical processing. Keep fountains, water gardens and coolant systems at your complex clear and refreshed with an epoxy-coated IS IH Stainless Steel Electric Farm Transfer End Suction Centrifugal Pump. A self-priming, portable utility electric centrifugal pump can speed up the draining process. Increase pressure in city mains or maximize filtration operations in pond systems with a booster IS IH Stainless Steel Electric Farm Transfer End Suction Centrifugal Pump. When electric centrifugal pump's time for a new centrifugal pump for water, sewage and chemical processing systems,IS IH Stainless Steel Electric Farm Transfer End Suction Centrifugal Pump got you covered.
HSYSBD
electric centrifugal pump Particularly suited to applications including watersupply to civil,agricultural and industrial plants, Pressure boosting, Fire-fighting,heating systems and air-conditioning, IS IH Stainless Steel Electric Farm Transfer End Suction Centrifugal Pump Moving industrial liquids,Irrigation, Refrigeration towers, Swimming pools, Washing plants.
KJSBH